Synthesis of Digital Two-Circuit Control Systems With Dynamic Correction for Arm Manipulator

Authors

  • Marko Klepach NUWM
  • Ivan Kovela National University Lviv Polytechnik
  • Serhiy Kovela Kingston University image/svg+xml , Kingston University image/svg+xml
  • Volodymyr Drevetskiy National University of Water and Environmental Engineering image/svg+xml , National University of Water and Environmental Engineering image/svg+xml

DOI:

https://doi.org/10.31713/MCIT.2019.47

Keywords:

controller, differentiator, parametric synthesis, arm manipulator

Abstract

The method of multicriterial parametric synthesis of two-circuit systems with discrete controllers in the space of parameters of their adjustment, including periods of discreteness of system contours is offered. The example that proves the effectiveness of this method was shown. The developed control system was applied to the simulation model of arm manipulator

References

Downloads

Published

2019-11-05

Issue

2019: Modeling, control and information technologies: Proceedings of III International scientific and practical conference

Section

Problems of automated control, optimization and parameters identification

How to Cite

Synthesis of Digital Two-Circuit Control Systems With Dynamic Correction for Arm Manipulator. (2019). MCIT: Proceedings of International Scientific and Practical Conference, 3, 106-107. https://doi.org/10.31713/MCIT.2019.47

Most read articles by the same author(s)