Calculation of the thermal mode of the LED device

Authors

  • Natalia Kulik National University of Water and Environmental Engineering image/svg+xml , National University of Water and Environmental Engineering image/svg+xml
  • Jakov Danchenkov National University of Water and Environmental Engineering image/svg+xml , National University of Water and Environmental Engineering image/svg+xml

DOI:

https://doi.org/10.31713/MCIT.2019.40

Keywords:

LED; radiator; heat removal

Abstract

The problem of heat removal from the substrate of LED light sources is considered. Modern methods of cooling of LEDs are reviewed. The calculation method is given and the radiator area for passive heat removal is calculated. The radiator was selected according to the given criteria.

References

Downloads

Published

2019-11-05

Issue

2019: Modeling, control and information technologies: Proceedings of III International scientific and practical conference

Section

Modelling of physical, technical and social systems

How to Cite

Calculation of the thermal mode of the LED device. (2019). MCIT: Proceedings of International Scientific and Practical Conference, 3, 146-148. https://doi.org/10.31713/MCIT.2019.40

Most read articles by the same author(s)